Oase Crystal Skim 350 Lily Pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lily Pipe für Oase CrystalSkim 350 perfekter Oberflächenkreislauf.
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
Das Modell stellt eine Lily-Pipe-Modifikation für den Oase CrystalSkim 350 dar, die die originale untere Kappe ersetzt und den Auslass optimiert.
Modellbeschreibung
Geometrie: S-förmiges, 100 mm langes Rohr (12 mm Innendurchmesser) mit zwei 90°-Biegungen, beginnend direkt am Pumpenauslass und endend in einem 30 mm Radius breiten Trichter 2 cm unter der Wasseroberfläche. Gesamttiefe: 120 mm vom Schwimmer bis Trichterende.
Schlüsselmaße:
Pumpenansatz: Ø 12 mm, nahtloser Übergang
Biegeradien: 20 mm (beide Bögen)
Trichter: 30 mm Radius breit
Wandstärke: 2 mm
Technische Verbesserungen berechnet durch AI
Strömungsoptimierung: Ersetzt direkten Abwurf durch kontrollierte, kreisförmige Oberflächenrückführung (v=0,61 m/s → 0,12 m/s).
Förderleistungsverlust: Nur 5,6% (250 → 236 l/h) bei 1702 Pa Gesamtwiderstand (+12% zu Original).
Vorteile: Kein Bodenaufwirbeln, homogener Oberflächenkreislauf,, Lily-Pipe-Optik.
Perfekte Custom-Lösung für aquascaping-taugliche Skimmer-Performance!
-------------------------------------------------------------------------------------------------------------------------------
The model represents a Lily-Pipe modification for the Oase CrystalSkim 350, replacing the original bottom cap and optimizing the outlet.
Model Description
Geometry: S-shaped, 100 mm long pipe (12 mm inner diameter) with two 90° bends, starting directly at the pump outlet and ending in a 30 mm radius wide funnel 2 cm below the water surface. Total depth: 120 mm from the float to the funnel end.
Key Dimensions:
Pump connection: Ø 12 mm, seamless transition
Bend radii: 20 mm (both bends)
Funnel: 30 mm radius wide
Wall thickness: 2 mm
Technical Improvements (calculated by AI)
Flow Optimization: Replaces direct downward discharge with controlled, circular surface return (v=0.61 m/s → 0.12 m/s).
Flow Rate Loss: Only 5.6% (250 → 236 l/h) at 1702 Pa total resistance (+12% vs. original).
Benefits: No bottom sediment disturbance, homogeneous surface circulation, Lily-Pipe aesthetics.
Perfect custom solution for aquascaping-worthy skimmer performance!