Reolink Doorbell Chime ESP32 Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little bracket to fit an ESP32 and a DSP into the Reolink Doorbell Chime case.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I brought a Reolink Doorbell Chime and was disappointed to find I couldn’t use it with Home Assistant - it seems to pair directly with the Reolink Doorbell, and I have a Unifi doorbell. Instead of throwing it away, I thought I would crack it open and see if I could flash my own firmware to it - but I didn’t recognise the chip.
In for a penny, in for a pound I thought I will use the nice case and power supply, replacing the internals with an ESP32 and DSP. This is the stl for the little bracket I made to hold the ESP32 and DSP. The source code (using ESPHome) can be found here.
BOM
Reolink Doorbell Chime https://www.amazon.co.uk/dp/B0CYGZLMS5
Seeed XIAO ESP32S3 https://thepihut.com/products/seeed-studio-xiao-esp32s3
MAX98357 I2S Amplifier Module https://thepihut.com/products/max98357-i2s-amplifier-module