Reolink Doorbell Chime ESP32 Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A little bracket to fit an ESP32 and a DSP into the Reolink Doorbell Chime case.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 10
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I brought a Reolink Doorbell Chime and was disappointed to find I couldn’t use it with Home Assistant - it seems to pair directly with the Reolink Doorbell, and I have a Unifi doorbell. Instead of throwing it away, I thought I would crack it open and see if I could flash my own firmware to it - but I didn’t recognise the chip.
In for a penny, in for a pound I thought I will use the nice case and power supply, replacing the internals with an ESP32 and DSP. This is the stl for the little bracket I made to hold the ESP32 and DSP. The source code (using ESPHome) can be found here.
BOM
Reolink Doorbell Chime https://www.amazon.co.uk/dp/B0CYGZLMS5
Seeed XIAO ESP32S3 https://thepihut.com/products/seeed-studio-xiao-esp32s3
MAX98357 I2S Amplifier Module https://thepihut.com/products/max98357-i2s-amplifier-module