Neutrik D-Series Keystone Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made the port smaller. Previous tolerances were too loose and let ports pop out when pushed at an angle.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The STEP file should make seeing these surfaces and making your own changes easier.
Definitely print in PETG since you need that sticky, but slightly bendy, properties to make sure nothing snaps like PLA. Though, you'll probably have no issues with PLA. ABS/ASA is overkill and stinky. If you're feeling bold, print in PC but good luck.
The box was designed by me, but I haven't uploaded the model :P . If you know 3D modeling, than the Neutrik website, coffee, and an hour should get you 90% of the way there.