Camera holder UK65 US65 UR65
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
should keep it better in place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This new holder for the UR / UK / US65 FPV camera should keep it better in place. That will prevent it from creeping into the canopy on frontal crashes. I designed it similar to the original to keep the same look.
Must be printed with flexible filament (TPU)! Be careful to not rip the lens from the PCB when you (dis)mount the holder!
The cam sits a bit higher, so you probably need to do some customization to the hole in the canopy for the video antenna.
I also added the Fusion 360 source file, if you like to make any changes yourself.
Update 2019-01-22:
-made the overall body wider, so the camera angle stays better
-changed screw hole, so it has more bite
-changed the slot, so camera is easier to (dis)mount
Print Settings
Supports:
No
Resolution:
0.15
Infill:
15%
Filament:
Sainsmart TPU
Notes:
I printed it with 1 wall, 3 bottom, 5 top layers and 15% infill (pattern: lines) to keep the weight minimal.
Category: R/C Vehicles