Monitor Shelf | No Gap + Thumbscrew Tightening
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A monitor shelf designed to print easily and fit neatly next to each other without any gaps between them
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Open Community License v1
Monitor Shelf | No Gap + Thumbscrew Tightening
The other designs available on printables are very nice, but none of them quite met my requirements so I made my own. I wanted it to be easy to print, be easy to put together + adjust the tightness of, be quick to churn out, and be filament efficient. So, this is what I came up with.


Remove the top and bottom layers of the shelf in your slicer and then use 35% honeycomb w/ 2 multiline for a stable, fast, and nice grid that will also save you a good chunk of filament. All of this is under strength in OrcaSlicer, and should be available in most any modern slicer. You can adjust the infill values however you want, but if there is not enough material it won't be stiff enough. Adding more walls can also help, I recommend 5 or more for the shelf.


Hopefully someone else will find this useful too 😁
--------------------------------------------------------
Changelog:
1.1:
-- Fixed thumbscrews being too small
-- Added optional backstop to prevent things from falling off
--------------------------------------------------------