1 / 2
Monitor Shelf | No Gap + Thumbscrew Tightening — image 1
1 / 2

Monitor Shelf | No Gap + Thumbscrew Tightening

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A monitor shelf designed to print easily and fit neatly next to each other without any gaps between them

Rating
5 / 5
Likes
15
Downloads
80
Makes
1
Views
527
Reviews
1

Updated at source:

Model information

Category
Office
License
Open Community License v1

Monitor Shelf | No Gap + Thumbscrew Tightening

The other designs available on printables are very nice, but none of them quite met my requirements so I made my own. I wanted it to be easy to print, be easy to put together + adjust the tightness of, be quick to churn out, and be filament efficient. So, this is what I came up with.


Remove the top and bottom layers of the shelf in your slicer and then use 35% honeycomb w/ 2 multiline for a stable, fast, and nice grid that will also save you a good chunk of filament. All of this is under strength in OrcaSlicer, and should be available in most any modern slicer. You can adjust the infill values however you want, but if there is not enough material it won't be stiff enough. Adding more walls can also help, I recommend 5 or more for the shelf.


Hopefully someone else will find this useful too 😁

--------------------------------------------------------

Changelog:

1.1:
-- Fixed thumbscrews being too small
-- Added optional backstop to prevent things from falling off

--------------------------------------------------------

Tags