Pi 4 Snapfit 60mm fan case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my original design inspired by John Sinclair's idea of showing the infill of the print…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 935
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Note: This is an old model that I am keeping up as people are still downloading it, apologies for the terrible cover photo.
This is a later version of my 60mm fan snapfit case design and features a screwless design that allows the Pi and fan to clip into place. The whole case also snaps together nicely and comes apart by squeezing it along the longest sides.
To get the cool mesh make sure you print with 0 top or bottom layers and use a 2D infill pattern, I used the triangle infill pattern at 30-60% infill with infill line directions at 90°.
Print Settings
Supports:
No
Resolution:
0.2
Infill:
30-60%
Notes:
PLEASE MAKE SURE TO USE 0 TOP AND BOTTOM LAYERS TO ACHIEVE THE MESH.