Single eye rinse- water bottle 28mm cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small on-the-go single eye rinse. Does not replace medical devices- only a stop-gap measure in remote/low access areas
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 374
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a single eye rinsing device designed to print as a single piece, be minimal filament usage, and require no support or brim to print (with good plate maintenance).
Designed to fit 28mm bottle caps to be glued into the neck of the device, borrowing the relatively universal tolerances of US standard bottle caps, which allow bottles up to 2 liters in size to be used.
It is recommended to dip this in a food safe sealant if you intend to have the device be more than "single use".
I make no claims to the safety of using the device, as individual printing quality varies by the skill of the person printing and the quality of materials they use. This is NOT intended to be a replacement for medical services, a proper safety shower and eye flushing equipment, or so forth: only recommended to be used to GET yourself TO the PROPER EQUIPMENT or MEDICAL SERVICES.