VW Sharan I 2003 seat rail guide spacers / slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front seats railing replacement spacers / sliders
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
VW Sharan I front seats railing replacement spacers / sliders.
Modeled them as close to the original as possible, however I found that they are a tad too loose. They work great, there is just a little more play, you may consider printing at 101-102% scale.
Fits VW Sharan I produced between 1995-2010.
May fit twin models like Ford Galaxy, Seat Alhambra.
Set for one rail
One railing requires 2x small spacer and 1x long spacer.
Printing instructions
Print with PETG or plain Nylon with 0.1 mm layer height (for better layer adhesion) with 5 walls.
Print upside down with brim and supports. They should snap off easily with the brim.
Be warned, carbon fiber an glass fiber nylon is more brittle and abrasive, it may not work well in this application.