1 / 2
Large monitor stand / desk shelf
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Monitor stand for 300mm desks.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
Legs for a monitor stand. Spruce plywood was used as a board. Printed from PLA lying on the outside - on the inside there are handles for small screws. Supports were used for printing and due to the small printer (MK4S) I had to cut the parts in a slicer and add a connector. Tested for a large 32'' widescreen monitor and it works fine. The height of the stand (legs) is about 7 cm.