Vase-mode wall bumper for tube handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protect your wall from scratches and marks from tools with tube handles
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple wall bumper that clips itself to tube handles to given them some space and prevent them from scratching or marking the wall (see photos). The bumper prints in vase mode in a few minutes and uses less than a meter of filament.
In my case, the handle bar is 3/4-in (19 mm) so the inner radius is 18 mm so that it clips securely. If you need something different, both FreeCAD and STEP files are included.
To print, use vase mode. Even with a 0.4 mm nozzle (as I used), I recommend increasing the outer wall thickness to 0.75 mm. I also set the number of bottom layers to zero.