1 / 2
Vase-mode wall bumper for tube handles — image 1
1 / 2

Vase-mode wall bumper for tube handles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Protect your wall from scratches and marks from tools with tube handles

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a simple wall bumper that clips itself to tube handles to given them some space and prevent them from scratching or marking the wall (see photos). The bumper prints in vase mode in a few minutes and uses less than a meter of filament.

In my case, the handle bar is 3/4-in (19 mm) so the inner radius is 18 mm so that it clips securely. If you need something different, both FreeCAD and STEP files are included.

To print, use vase mode. Even with a 0.4 mm nozzle (as I used), I recommend increasing the outer wall thickness to 0.75 mm. I also set the number of bottom layers to zero.

Tags