Reolink Dome Camera Angle Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make your dome camera pan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adapters for Reolink cameras to mount them with an angle on the D20 junction box.
Two versions:
18 Degree Version
For Reolink Duo 3V PoE
Using F-Hole-Pattern on the camera side and D-Hole-Pattern on the junction box.
(F and F on both sides would have interfered with each other)
55 Degree Version
For Reolink RLC-1240A
Using CUSTOM-Hole-Pattern on the camera (this camera is normally NOT compatible with the D20 box) and F-Hole-Pattern on the junction box.
Both pan to the right. But could be used to the left if mounted upside down, flip image in firmware.
I used M4 threaded inserts to mount the camera and the original screws to mount the adapter to the junction box.
In the pictures of the grey version the cable hole was smaller than it is right now, i increased the diameter to save filament.
I recommend PETG for outdoor use.