Wera Toolcheck Plus holder for 1" pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pegboard holder for Wera Toolcheck Plus (new non-beltclip version), with optional logo on front
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I took DocWeebl's Wera ToolCheck Plus holder, removed the Ikea Skadis mounts, and replaced them with the pegboardy parts of ABurton491's hooks.
2 files provided, one that's a straightup combo of those 2 models and one that also includes a little wera logo on the front.
Even though I used a printer with a super worn hotend, it printed easily in the standard orientation with the bottom on the bottom and plenty of supports for the pegs.
In the future I would give different pegboard pegs a shot, these ones were a bit thin and brittle compared to tohers I've used. BUT, there's 5 sets ofhook/peg pairs so you'll probably be OK if one or two of them break :)