Wera Toolcheck Plus holder for 1" pegboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard holder for Wera Toolcheck Plus (new non-beltclip version), with optional logo on front
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I took DocWeebl's Wera ToolCheck Plus holder, removed the Ikea Skadis mounts, and replaced them with the pegboardy parts of ABurton491's hooks.
2 files provided, one that's a straightup combo of those 2 models and one that also includes a little wera logo on the front.
Even though I used a printer with a super worn hotend, it printed easily in the standard orientation with the bottom on the bottom and plenty of supports for the pegs.
In the future I would give different pegboard pegs a shot, these ones were a bit thin and brittle compared to tohers I've used. BUT, there's 5 sets ofhook/peg pairs so you'll probably be OK if one or two of them break :)