Voron top rail mount - ERCF, EMU, MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong top rail mount, reinforced by screws
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A strong extrusion mount reinforced using screws to join top and bottom parts.
Does not collide top panel of your voron !
To be printed in orientation from files.
Designed to be used with same rail length as ercf top mounts:
400mm rails for a 250mm voron.
450mm rails for a 300mm voron.
500mm rails for a 350mm voron.
Now with multiple height versions (the height references the height offset between the two rails).
The bom is for two sides, as you need the parts on both ends of the extrusion.
BOM
4x | M3x6mm Socket Head Cap Screw (for 5mm base) To join the two parts |
4x | M3x8 Flat Head Cap Screw (to mount onto the rail) |
4x | M3 T-nut/ Hammerhead T-nut for rail mounting |
Changelog :
13 March 2026
Made a version that is less wide (default version now, kept original width version as wider version)
Add extra heights (5mm, 10mm, 15mm, 20mm)
Add step file containing all variations
Moved old version to legacy folder