10" inch rack mount ear bracket for Mikrotik CRS310 series switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Companion for the packaged rack mount that allows the switch to be mounted in a 10 inch rack.
- Ocena
- 3,5 / 5
- Polubienia
- 12
- Pobrania
- 130
- Wydruki
- 2
- Wyświetlenia
- 490
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a "standard" 10". The printed bracket can be installed with the included screws.
Should be compatible with these models at the time of publishing:
CRS310-8G+2S+IN (tested)
CRS310-1G-5S-4S+IN
Printing tips
Place on bed in the orientation of the STL file for optimal strength
Use a rigid, heat-resistant material like ASA or PC
Print with extra perimeters (I used 4 walls with a 0.4mm nozzle)