1 / 8
3D Printable Tennis Ball Bike Suspension Project — zdjęcie 1
1 / 8

3D Printable Tennis Ball Bike Suspension Project

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

🚲🎾 The NeoBall 3B Tripod is a fun, functional, DIY suspension upgrade.

Ocena
0 / 5
Polubienia
9
Pobrania
20
Wydruki
0
Wyświetlenia
340
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tired of a harsh ride? Welcome to the "NeoBall Rocker 3B Tripod" – a quirky, functional, and completely 3D-printable bike suspension project! This isn't just another bracket; it's a clever rocker mechanism that uses a few humble tennis ball as its core spring and damper unit. Squeeze the balls into the tripods,  and enjoy a noticeably smoother roll over bumps.

What makes it special?

Tennis Ball Spring: Provides a surprisingly effective and progressive cushion. Balls are cheap, easy to replace, and you can use old ones! Clubs often sell used ones in big bunches for less on ebay.

"Tripod" Design: The three-legged structure ensures stable, multi-directional support and looks fantastic.

Print-In-Place Simplicity: No screws, no glue – just print it as one ready-to-use piece (though a little post-print cleanup might help).

Print it in your favorite color to match your bike's style!

This is a perfect weekend project for tinkerers and casual cyclists. It’s a fantastic conversation starter and a brilliant introduction to functional 3D printing. I'd be thrilled to see your printed and installed creations – please share your makes and photos!

License: This model is published under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. Feel free to remix and share, just credit the original and share under the same terms.

Assembly

This model is designed as a print-in-place part! It should come off your print bed ready to use. No tools or extra hardware are required for the rocker itself. No glue needed, just press in the balls.

BOM

You won't need much for this project!

Filament: PLA / PETG / ASA

12 x Standard Tennis Ball

Tagi