1 / 2
DEMAG Portalkran Lüfterabdeckung Reparaturring / crane fan cover repair
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slip-on repair ring for a broken DEMAG crane fan cover
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple slip-on repair ring for a DEMAG brand portal crane motor fan cover.
The ring has two thin tabs that retain the edge, no glue needed. Fit is tight, you might have to hammer the ring "gently" in place from the grill side with a hammer and a piece of wood. If it doesn't fit, print it at 102% or gently use a heat gun on the sides without the tabs.
Print in ASA or PETG without supports.