1 / 2
1/10 Drift Wheel - Racing Hart CP-035 style — zdjęcie 1
1 / 2

1/10 Drift Wheel - Racing Hart CP-035 style

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Classic JDM style wheel for your 1/10 RC Drift Car in multiple offsets

Ocena
0 / 5
Polubienia
9
Pobrania
44
Wydruki
0
Wyświetlenia
258
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

A replica of a classic JDM wheel for your 1/10 drift car! Available in offsets ranging from +3mm to +10mm.

Use notes:

  • The front, outermost lip is a slightly larger diameter for an exaggerated stretched-tire appearance. You will need to install the tire from the rear.

  • Adaptive/variable layer height will improve print time/detail

  • The overhanging tire mounting surfaces do not need supports. The underside of the hub and spokes require many supports.

  • So far they seem to be reasonably durable for what they are

  • Tire mounting foam is recommended

Tagi