1 / 2
1/10 Drift Wheel - Racing Hart CP-035 style
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Classic JDM style wheel for your 1/10 RC Drift Car in multiple offsets
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 44
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A replica of a classic JDM wheel for your 1/10 drift car! Available in offsets ranging from +3mm to +10mm.
Use notes:
The front, outermost lip is a slightly larger diameter for an exaggerated stretched-tire appearance. You will need to install the tire from the rear.
Adaptive/variable layer height will improve print time/detail
The overhanging tire mounting surfaces do not need supports. The underside of the hub and spokes require many supports.
So far they seem to be reasonably durable for what they are
Tire mounting foam is recommended