CHC-Me v1.2 Ender 3 v2 Neo Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan duct for the Ender 3 v2 Neo using a stock heatsink and CHC Pro heater
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fan duct for the Ender 3 v2 Neo using a stock heatsink and CHC Pro heater
I made this because there weren't any designs for a volcano hotend for the Neo, and it would be a fun challenge to design my own. The fan duct is heavily influenced by the Mini-Me fan duct.
### Important
The part cooling performance is untested, and the design might get updated
### Part list
For this design you will need some parts from the stock fan shroud + some more:
- M3 screws**
- 4010 axial fan*
- CR/BL-touch*
- CHC Pro heater
- 5015 blower fan
- 5015 mounting screws
*stock parts
**You can scavenge screws from other parts of the printer
#### Assembly
1. Unclip and unscrew stock fan shroud
2. Unscrew 4010 heatsink fan
3. Unscrew CR-touch mount and 4010 blower mount (keep the screws)
4. Attach CHC-Me using the screws
5. Screw in 4010 heatsink fan with the 5015 Mount in front
6. Mount the rest of the components
#### Changelog
- 13.02.2026 - v1.2 Moved CR-Touch further down + moved ADXL345 to the right side for better cable management. Blower mount is still the same
- 09.02.2026 - v1.1 Added ADXL345 Mounting holes