Filament Spool Stand with a Separation Floor for a Muesli Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool stand for a muesli box used for filament storage with silica gel separation floor to prevent silica gel f
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This was just experiment that turned out rather good, so I decided to share it with others, perhaps just as an inspiration for your own filament storage solutions.
Separation floor fits tight to the inner walls of muesli box an no silica gel comes through even if the box (with filament inside) is turned upside down.
If the silica gel under the feet bothers you, you can effectively remove it by tilting the box to one side and pressing the feet down with your fingers. Then tilt it to the other side and press the other two feed down as well. Finally tilt the muesli box in upward position while gently pressing all four feet down and slightly shake it to distribute the silica gel evenly.
Link to the CAD fie:
I have used the following muesli box: https://www.amazon.de/dp/B08DCWKK4B