Flashforge AD5X Dry Box Plug
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small plug to print instead of the TPU plug
- Ocena
- 3,5 / 5
- Polubienia
- 33
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alternative Dry Box Plug (Easy-Print PLA Design)
This plug is designed for the FlashForge dry box as a simpler, more print-friendly alternative to the original TPU plug.
The geometry has been intentionally simplified to reduce overhangs and tolerance-critical features, making it easier to print reliably in PLA. It installs in the same location as the original plug while still providing a clean, functional seal for unused openings on the dry box.
If you’re considering printing this blanking plug, have a look at the PLA outlet plug I designed for the opposite side.
Why This Version?
Easier to print than the original TPU plug
Simplified geometry for improved TPU print reliability
No supports required, although a brim is recommended
Provides a secure seal
Compatibility
Accessory: FlashForge Dry Box
Designed as a replacement for the original TPU plug
Please check fit before final installation if your dry box has been modified
Printing Notes
Material: PLA/PETG recommended
Slow print speeds advised
0.2–0.28 mm layer height works well
2–3 perimeters suggested
5mm brim recommended
A straightforward, easier-to-print TPU alternative that delivers a reliable seal without the frustration of complex geometry.