Shelby GT500 rear wing shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf inspired by the Shelby GT500 rear wing design, for displaying Hot Wheels die-cast cars collection in a kids' room.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Shelf inspired by the Shelby GT500 rear wing design, for displaying Hot Wheels die-cast cars collection in a kids' room. Modeled in Autodesk Fusion.
You need 2 pieces of each part. Other two parts are mirrored!
I recommend adding modifiers with denser infill in the slicer to strengthen the mounting points.
The main body uses 20% infill, while the modifiers use 30% infill, or more.You can use some MDF board 600x200 or 800x200mm for shelf itself. (e.g. IKEA BURHULT, TRANHULT… ). Feel free to use any different you want.
Mounting holes are Ø=5mm (wall) and Ø=4mm (shelf).
Material needed:
- 2 or 4 bigger flathead screws for mounting consoles on the wall - 5x60-80mm
- 4 countersunk screws to mount shelf to the consoles - 4x20mm
- double sided tape for gluing side wings to the shelf
Tighten the screws gently!
NOTICE: If you have a carbon fiber pattern plate, you’ll get a nice carbon fiber-looking texture on the bottom of your printed parts. Like me :)
Tree (organic) support I used only for mounting holes. Maybe not needed at all.
Printed in PETG.
☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus158 ❤ Thank you!