Shelby GT500 rear wing shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shelf inspired by the Shelby GT500 rear wing design, for displaying Hot Wheels die-cast cars collection in a kids' room.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
Shelf inspired by the Shelby GT500 rear wing design, for displaying Hot Wheels die-cast cars collection in a kids' room. Modeled in Autodesk Fusion.
You need 2 pieces of each part. Other two parts are mirrored!
I recommend adding modifiers with denser infill in the slicer to strengthen the mounting points.
The main body uses 20% infill, while the modifiers use 30% infill, or more.You can use some MDF board 600x200 or 800x200mm for shelf itself. (e.g. IKEA BURHULT, TRANHULT… ). Feel free to use any different you want.
Mounting holes are Ø=5mm (wall) and Ø=4mm (shelf).
Material needed:
- 2 or 4 bigger flathead screws for mounting consoles on the wall - 5x60-80mm
- 4 countersunk screws to mount shelf to the consoles - 4x20mm
- double sided tape for gluing side wings to the shelf
Tighten the screws gently!
NOTICE: If you have a carbon fiber pattern plate, you’ll get a nice carbon fiber-looking texture on the bottom of your printed parts. Like me :)
Tree (organic) support I used only for mounting holes. Maybe not needed at all.
Printed in PETG.
☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus158 ❤ Thank you!