Z-Upgrade 4.0b for VCore 4.0/4.1 Ballscrews mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Z-Upgrade replace the original Z system with a ballscrews driven system. The best system for layer staking!
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
STORE LINK
AVAILABLE with 1204 and 1605 Ballscrew
A Z-Upgrade complete overhaul for VCORE 4.0/4.1
The Z-Upgrade replace the original Z system with a ballscrews driven system.
More precise, more reliable over time, it offers a very high repeatability and a perfect consistancy in layer staking compared to a trapezoidal screw.
Maintenance-free and made to last in a production line. No wobble over Z.
Proofed design since 2021. More than 450+ happy users
Lifetime support and warranty over the parts
Integrated design pushed further to maximize fonctions and size to keep the whole print Z volume
Following the feedbacks, tests, assemblies, this version is born to simplify, and solve all the little things from the 3.x versions.
Parts count reduced, hardware quantity reduced, steps of assembly reduced, price reduced!
The Spring Guard from the previous revision, but better!
Springs guard will secure the balls, and will delete the possible eventuallity of them escaping the mechanism.
This can happen when lifting the bed or the PEI, or over a short over-acceleration on a Z motion by exemple.
This modification will allow a better Z accelerations (Tilt+Mesh faster)
Avoid time lost in looking for the balls which fell of.
This solution won't mess with the anti-wobble capability.
This last version allow an easier assembly, and a simplified bed arm design
New mod, new applications:
Z-Upgrade has been designed to fit all the needs: From standard stock 300mm machine to extreme 1000mm build with resilient conception in mind, the Z-Upgrade 4.0 fits for every need.
Details:
The base kit is common to any Vcore size, only the ballscrews needs to be longer or shorter to anapt, 300, 400, 500 or any other dimension
To choose the Ballscrews: Machine size + 150mm
EXEMPLE: I got a Vcore 400, I choose 550mm (400+150) Ballcrew lenght
NEW: HEAVY DUTY version:
-1605 Only
-10mm belt + Pulleys
-Unlock very high machine size above 1m tall
-Reinforced arms and blocks
Manual Available here or at the bottom of the files section page
BOM Available here
Kits printed in high quality annealed PA12-CF or PPS-CF with advanced in house process.
Release date | Patch done |
01/02/2026 | Official release |
|---|---|
02/02/2026 | Small aestetic fix on the rear arm |
04/02/2026 | top retainers a bit redesigned to avoid ooze guard possible collision |
05/02/2026 | BOM + User Manual release |
10/03/2026 | Wider screw opening, 4mm hole insert corrected |
15/03/2026 | 1204 model release |
17/03/2026 | MANUAL + BOM Update for 1204 |
25/03/2026 | Small changes to print it easier (Bottom cage and tensionner) |
27/03/2026 | Small changes to print it easier: Mainblocks and FK10 units (for 1204), Some clearance margins inside the bottom cage |
01/04/2026 | Small changes in anchoring points for the Mainblock R+L (-2mm of seat), BOM revision with the add of a M4x40mm screws for the rear block instead of the M4x20mm. For previous printed parts, use a 2mm washers or printed standoff |
10/04/2026 | FK12 custom (SFU1605) model added for 6001 Bearings (28mm) as secondary option of a metal FK12 |
24/04/2026 | On the FK12 and FK10, no locknut need to be installed since it can induce Z artifacts in some cases. Manual + BOM updated |
10/05/2026 | Rear arm champfer correction (previous interference with VAOC module) |
05/06/2026 | HEAVY DUTY version release (PATCH NOTE BELLOW) |
23/08/2026 | HEAVY DUTY version Rear arm correction and clearances added |
28/08/2026 | 1605 Arm design variant to allow the use of brittle material for pins insertion This variant aim to solve a possible issue: 3mm pins are meant originally to be pressfited in their sockets. This is often an issue with low ductility materials ( like PPS, ABS, PC) and can break locally around the socket and damage the part. Now you just have to insert it with a drop of cyanoacrylate glue (Loctite) to secure it. Manual in the upgrade process. |
STORE LINK
Compatibility:
ONLY for VCORE 4.0/4.1 CORE XY and HYBRID CORE XY
The Z-Upgrade fit exactly like the stock Z-System volume, it is then fully compatible with IDEX and VAOC. Only the 3mm holes on the bottom plates needs to be enlarged to 4mm
License:
Under license CC-SA-BY-NC 4.0
Customs:
Important Note foor US customers: |
This Bundle has some advantages for North America customers: Tariff will only apply to printed parts, the ballscrews are shipped from a US supplier, this will reduce the shipping and the import taxes. Z-Upgrade parts are the same across 300/400/500, only the ballscrew lengh changes. |
Credits:
-@Ratrig for the VCORE-4.0/4.1 amazing design-@MirageC / EVOMOTO Oldham/Wobblex magical design