Screwless sparingly Ikea Lack leg extensions in 4cm steps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used it for concrete slab between Prusa MINI+ and absorber below table while keeping maximal 180mm print height.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
“foot” is 4cm Ikea Lack leg extension I needed to regain 180mm maximal print height for Prusa MINI+ below Lack table.
“foot2” is 4cm additional extension I needed for placing 4cm thick concrete slab between printer and absorber (old gym mat).
1×foot + k×foot2 extends one table leg by (k+1)*4cm length with 0≤k.
Screwless, and filament sparingly because of 41×41mm inner empty space, while remaining stable.
Both printed with PLA, 0.25mm layer height, 20% infill, no brim.
“foot” without support, “foot2” with support.
Related forum thread:
https://forum.prusa3d.com/forum/general-discussion-announcements-and-releases/ikea-lack-table-raising/#post-595882
P.S:
I just needed to stack table with leg extension and found no adapter for that, so I created my own stack adapter for fitting 4cm leg extension:
https://www.printables.com/model/170964-ikea-lack-table-stack-adapter-fitting-4cm-leg-exte