RepRapMicron V0.05 Micron Accurate Axis Driver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stepper-driven linear actuator with a precision greater than 1 micron and range of motion ~8mm for precision mechanisms.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A precision stepping mechanism that can be controlled by a 3D printer or CNC controller. With a 400-step stepper motor, it can attain an accuracy of better than 1 micron. Full construction details and links to source code are here: https://github.com/VikOlliver/RepRapMicron/wiki/Maus-Axis-Driver-Construction and are not reproduced here.
It is intended to drive the RepRapMicron, a 3D printer that fabricates and manipulates micron-scale objects.
Prints from PLA with no support. Flexure Coupling may require a brim.
Note that a constrained axis is necessary to control unwanted lateral motion. If you are unable to provide this on your driven mechanism, see the V0.05 Z Axis Driver details on the above wiki. Printable files are here on Printables.
Note: The PIKA version of the axes assembly will need a slightly different Motor Pillar design motor_pillar_pika.stl. I've added this as a separate file for advanced devs.