Skadis T-Nut Screwdriver Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for screwdrivers that have a flat end to the handle using using T-nut mount system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This was designed for a Bahco 808050 screwdriver but probably fits other models with a similar design. The shaft hole is about 15mm and the recess for the handle is 35mm.
Prints in provided orientation without support.
Designed for M3 screw, with 6.5mm counterbore for screw head. I used these M3 printed thread T-Nuts: Skadis T-nut mounting system, threaded for M3 or UNC #5-40 screws By ORM
You should also be able use the M2/M2.5 T-Nuts from here: Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178
You might want to use a suitable washer in that case.