1 / 5
Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project” — zdjęcie 1
1 / 5

Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project”

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dies ermöglicht die einfache Montage eines Kippschalters/ This allows for easy installation of a toggle switch

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht.
Das einfache Schutzgehäuse dient hauptsächlich dem Schutz gegen mechanische Schäden und ist optional. In dieses müssen zwei Einschmelzgewinde M3 x 5,6 oder M3 x 4,0 mm eingeschmolzen werden. Der Deckel wird mit Sekundenkleber eingeklebt.

Translation:DeepL

To switch the LED lighting of the housing, I designed mounting material for this switch. Holes with a diameter of 26 mm and 3.5 mm are drilled into the side wall of the housing.
The simple protective housing mainly serves to protect against mechanical damage and is optional. Two M3 x 5.6 or M3 x 4.0 mm threaded inserts must be melted into this housing. The cover is glued in place with superglue.

Tagi