1 / 5
Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project” — image 1
1 / 5

Montageplatte eines Schalters für LED-Streifen für das „PrintClosure-Project”/ Mounting plate for a switch for LED strips for the “PrintClosure Project”

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dies ermöglicht die einfache Montage eines Kippschalters/ This allows for easy installation of a toggle switch

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Um die LED-Beleuchtung des Gehäuses zu schalten, habe ich Montagematerial für diesen Schalter konstruiert. In die Seitenwand des Gehäuses werden Bohrungen mit einem Durchmesser von 26 mm und 3,5 mm angebracht.
Das einfache Schutzgehäuse dient hauptsächlich dem Schutz gegen mechanische Schäden und ist optional. In dieses müssen zwei Einschmelzgewinde M3 x 5,6 oder M3 x 4,0 mm eingeschmolzen werden. Der Deckel wird mit Sekundenkleber eingeklebt.

Translation:DeepL

To switch the LED lighting of the housing, I designed mounting material for this switch. Holes with a diameter of 26 mm and 3.5 mm are drilled into the side wall of the housing.
The simple protective housing mainly serves to protect against mechanical damage and is optional. Two M3 x 5.6 or M3 x 4.0 mm threaded inserts must be melted into this housing. The cover is glued in place with superglue.

Tags