REV 12v Battery Charging Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging station for REV 12v batteries used in FTC + a Q4AC Charger
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the charging station we (Build For Change #20669) made and use.
There's room for 6 batteries plus the charger on top and 2 80mm fans to cool the batteries while charging.
BOM & links to buy parts:
1x ToolKitRC Q4AC Charger aliexpress.com/item/1005006147099023.html The XT30 version is unobtanium, so we'll be using adaptors
2x 80*80*25mm 12v fans (NOTE: These are 12v for the fan boost adapter! Another option is to use 5v fans and wire them directly through the micro USB port, I just had 12v fans on-hand so we used those instead plus the booster): aliexpress.com/item/1005006306536871.html Buy 8025, 12v
1x 5v USB to 4 - Pin 12v adapter: aliexpress.com/item/1005008143717478.html
1x Micro USB to USB adapter: aliexpress.com/item/32578079955.html Or solder on a micro USB head instead of using an adapter
4x XT60 to XT30 adapters: aliexpress.com/item/1005007407760388.html Buy a set of 4
8x fan mounting screws (can be taken from any old computer, or M5x8mm or longer would also work I think)
4x M3x6mm for connecting the 2 printed parts together