REV 12v Battery Charging Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Charging station for REV 12v batteries used in FTC + a Q4AC Charger
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the charging station we (Build For Change #20669) made and use.
There's room for 6 batteries plus the charger on top and 2 80mm fans to cool the batteries while charging.
BOM & links to buy parts:
1x ToolKitRC Q4AC Charger aliexpress.com/item/1005006147099023.html The XT30 version is unobtanium, so we'll be using adaptors
2x 80*80*25mm 12v fans (NOTE: These are 12v for the fan boost adapter! Another option is to use 5v fans and wire them directly through the micro USB port, I just had 12v fans on-hand so we used those instead plus the booster): aliexpress.com/item/1005006306536871.html Buy 8025, 12v
1x 5v USB to 4 - Pin 12v adapter: aliexpress.com/item/1005008143717478.html
1x Micro USB to USB adapter: aliexpress.com/item/32578079955.html Or solder on a micro USB head instead of using an adapter
4x XT60 to XT30 adapters: aliexpress.com/item/1005007407760388.html Buy a set of 4
8x fan mounting screws (can be taken from any old computer, or M5x8mm or longer would also work I think)
4x M3x6mm for connecting the 2 printed parts together