Snapmaker U1 top cover for IKEA SAMLA 45l with venting, TPU coating and USB webcam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add venting, TPU-coating and camera mount to SAMLA adapter.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 1925
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is based on another remix that adds the means to slide the SAMLA box backwards to allow for venting when printing PLA.
I have added a small coating of TPU (3 layers) for a smother finish that makes sliding smoother.
Additionally I added a mount for a webcam in the back between toolheads 2 and three so I can monitor my prints with top-down view.
Replaces only the upper parts of the original model, still needs the lower parts of the original one.
Print either plate 1 (no webcam mount) or 6 (webcam mount), not both.
Adjust hole diameter on top of the tower (plate 6) if using a different screw than quarter-inch one.
Adjust the tunnel diameter at the bottom of the stand (plate 6) if the diameter of your webcam's cable >3mm
Don't modify walls and infill settings on plate 6 - the extra foundation modifier stabilizes the mount stand.
Print in PETG, not PLA so TPU sticks. Also better heat resistance with PETG.