Snapmaker U1 top cover for IKEA SAMLA 45l with venting, TPU coating and USB webcam mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add venting, TPU-coating and camera mount to SAMLA adapter.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 121
- Makes
- 0
- Views
- 1,925
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is based on another remix that adds the means to slide the SAMLA box backwards to allow for venting when printing PLA.
I have added a small coating of TPU (3 layers) for a smother finish that makes sliding smoother.
Additionally I added a mount for a webcam in the back between toolheads 2 and three so I can monitor my prints with top-down view.
Replaces only the upper parts of the original model, still needs the lower parts of the original one.
Print either plate 1 (no webcam mount) or 6 (webcam mount), not both.
Adjust hole diameter on top of the tower (plate 6) if using a different screw than quarter-inch one.
Adjust the tunnel diameter at the bottom of the stand (plate 6) if the diameter of your webcam's cable >3mm
Don't modify walls and infill settings on plate 6 - the extra foundation modifier stabilizes the mount stand.
Print in PETG, not PLA so TPU sticks. Also better heat resistance with PETG.