1 / 2
Friction-Fit TPU Arrow Fins (Glue-Optional, Lightweight) — zdjęcie 1
1 / 2

Friction-Fit TPU Arrow Fins (Glue-Optional, Lightweight)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Arrow fins designed to friction-fit onto the rear of an arrow shaft. Printed in TPU for easy install

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
171
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These arrow fins are designed to simplify fletching by eliminating the need for precise alignment and messy glue. The model consists of a thin cylindrical sleeve that slides over the back of the arrow shaft, with three integrated fins evenly spaced around it.

The fins are intended to be 3D printed in TPU, allowing the sleeve to flex slightly and grip the arrow through friction. Glue can be used if desired, but the design aims to make it optional.

To minimize weight, the sleeve is only 0.5 mm thick, making it suitable for experimentation and prototyping. This design has not yet been flight-tested, so performance, durability, and consistency have not been validated.

Best suited for:

  • Experimentation and prototyping

  • DIY arrows

  • TPU-capable printers

Feedback and testing results are welcome.

Tagi