Dryspool for desiccant / silica gel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A desiccant drying container the size of a filament spool. The 30mm version fits between spools in the Anycubic ACE Pro
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have created a drying container for desiccant aka. silica gel the size of common filament spools. The purpose is to dry the desiccant in a filament dryer or (heated) AMS-unit like Anycubics ACE Pro. The overall spool dimensions match the spools from Prusa or Bambulab (at 67mm wide).
There is also a second slimmer (30mm) version that can sit inbetween spools in my Anycubic ACE Pro MMU unit.
The 2 pieces print on their outside surface and won't need any supports. The top half can be filled with desiccant beads first and the bottom half just screwing in. Tolerances are pretty loose so should work with all printers.