Lightning McQueen “95” Racing-Style Desk Prop with Press-Fit Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean “95” racing-style desk prop with a slot-and-notch press-fit base — no glue, no supports, and easy to print.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 325
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a 3D printable “95” racing-style desk prop designed for tool-less, glue-free assembly.
Each number has a built-in notch that slides securely into a matching cavity on the baseplate, creating a stable press-fit connection without adhesives. The stand is low-profile and weighted for good balance on your desk.
Designed in Fusion 360 and optimized for PLA printing, this model is beginner-friendly and prints cleanly with no supports.
Perfect as:
Desk decor
Car/racing themed display
Shelf prop
Gift for motorsport fans
🖨 PRINT SETTINGS / RECOMMENDATIONS
Material: PLA (PLA+ or Silk PLA looks great)
Supports: ❌ Not needed
Assembly: ✅ Press-fit (no glue required)
Skill Level: Beginner
Suggested settings (optional):
Layer height: 0.2mm
Infill: 10–15%
Walls: 2–3
Brim: Optional (if you have bed adhesion issues)
Tolerance note (important):
If the fit is too tight on your printer, scale the numbers to 99.8–99.9% or lightly sand the notch.
🧩 ASSEMBLY INSTRUCTIONS (No Glue)
Print both parts: Numbers and Base
Align the notch on each number with the cavity in the base
Press straight down until fully seated
The fit should hold firmly on its own
(If you ever want to permanently fix it, a tiny drop of glue can be added — optional.)