Desk Mount Removable Trash Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bin allows you to throw you trash or scraps in this bin then easily slide the bin off for easy Disposal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This bin allows you to throw you trash or scraps in this bin then easily slide the bin off for easy Disposal.
When putting the rails on the clamp they maybe a bit hard to get to snap into the holes but they should go in. I used super glue to make sure they don't come come out.
The screw you will need to cut in the slicer to print in 2 pieces. Make sure when you cut that there are 3 holes and not 3 rectangles, if there are 3 rectangles turn the cut 90 degrees. To glue the screw together you will need 3 small pieces of filament and some super glue.
I have added a deeper bin.
Some filing maybe needed to have the bin slide on and off easily.