SpeedyBee Maser 5 v2 - Side Panel - LED compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A side panel close to the original for SeedyBee's Master 5 v2 quadcopter. Versions with and without LEDs (4 & 5 mm).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Specifics about the model:
The model is based on and designed to closely match the original SpeedyBee side panel.
Three versions are available: one without LED holes, two with for 4 mm and 5 mm wide LED strips. (SpeedyBee's original strips are 4 mm wide.)
The LEDs clip snuggly into place.
Printable in any material. Tested in PLA and TPU.
No support material is required.
To get the left-hand version simply mirror the part. The .3mf and .bgcode files include both, left and right.
Note: The gcode information in the header is for the "LED" version utilizing PrusaSlicer's "balanced" print profile.