RAK Wismesh Solar Repeater Mini Unify Wall Mounting Brackets - Meshtastic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting brackets (ears) for any RAK Unify enclosure, such as the RAK Wismesh solar repeater for Meshtastic
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
If you purchased any RAK Unify enclosures, such as the RAK Wismesh Solar Repeater Mini for Meshtastic, you'll need some mounting brackets. The default kit doesn't include them, so I've made some based on RAK's own design documents. They can also be flipped (non-directional) in case you want to mount them inward for some reason. You'll need some M3x8 screws to mount them to the enclosure, and then screws of your choice (the top mounting hole is 5mm) to mount them to a surface.
I suggest printing with supports, as the holes on the back to hide the M3x8s may not print as well. However, you can certainly print without, they might just be a bit messy. This is not a perfect fit for the enclosure, there's about a 0.5mm gap, but it works very well and I'll be using it as such. Hope it helps with your Meshtastic setup!