Geometric Slim Can Koozie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Koozie for slim cans of Celsius, Phocus, etc. (about 2.25in/57.15mm diameter cans)
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 340
- Wydruki
- 2
- Wyświetlenia
- 729
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
A slim can koozie/cooler for 11.5-12 oz cans (340-355ml slim cans).
Satisfyingly tactile surface.
It should grip the can kind of tightly so it can't accidentally slide out. Just put your canned beverage into the koozie before opening it.
If you feel the grip on the can is too tight for your taste, in your slicer set your XY Size Compensation to something like -0.2mm to increase the opening by 0.2mm.
(Negative XY Size Compensation will also thin the wall of the model, so your other option is to scale up the model's X and Y sizes by a little bit. Try not to scale up on the Z axis, as it will increase the height of the koozie!)
No supports needed. Uses around 90g of filament at 15% rectilinear infill.
Hit Like, and Enjoy!