Liczymy pasujące modele…
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall mount pieces for Lego set 75355 UCS X-Wing 3-piece set to mount Lego set to the wall. Wall mount is angled in a way to show X-wing in flight, with enough clearance to allow all S-Foils to be locked in attack position. 3 pieces…
Inspired by this design . I didn't like the latching mechanism and it was very hard to print due to some poorly designed internal overhangs, so I decided to redesign it. My design leans more into the spring force of the clip to hold the…
No Supports Needed print at .16mm layer height 10% infill 40mms print speed for best results tight tolerance's (expert print)\ No Selling added handle version (drink wont line up with handle without repositioning) -if you'd like to sell…
This is a wall mount for the LEGO UCS X-Wing Starfighter (75355). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle to keep it secure. There are…
This model is compatible with the lego system.
This model is compatible with the lego system.
Eine angepasste Mikrofonhalterung (auch "Mauserl" genannt) für das Motorola MTP3550. Die Anpassungen habe ich rein im Bambu Studio vorgenommen, also nicht wundern, wenn die STL Dateien nicht hundertprozentig genau geschnitten und…
Bowsprit for Playmobil pirateship Not a perfect replication, but it works :)
Modelled from the broken comb of my HC5356 but according to ebay listings it fits following models: HC5150 HC5350 HC5355 HC5356 HC5550 HC575 Can't say it's a 100% perfect fit but it's more than good enough and is fully functional and much…
This model is compatible with the lego system.
This model is compatible with the lego system.
I wanted a koozie that could fit the slim 355ml cans, but that would then allow them to fit into coolers for thicker cans. I couldn't find anything that quite worked when searching, so I created a new one that fit in testing perfectly…
The Ferrari F355 Berlinetta is one of the most iconic sports cars of the 1990s , celebrated for its timeless design , thrilling performance , and refined Italian engineering . This model captures the car’s elegant proportions , smooth…
Replica Ferrari F355 OEM ashtray with reinforced areas that commonly crack or break.
This model is compatible with the lego system.
Using this model as a template ( https://www.prusaprinters.org/prints/37626-12 ) I created a new, basic model, but with a solid form so that I could choose what kind of infill I wanted. The same effect as the original can be achieved with…
Nested and keyed Beverage Can Dispenser for standard USA SLIM cans (12 oz. / 355 ml). I split it into two halves so it can be printed on a standard Prusa printer (MK3/MK4). The two halves are keyed together and glue is NOT required for it…
Mast for Playmobil pirateship 3550
This model is compatible with the lego system.
Low profile Pci-e bracket for HP NC364T 435508-B21 Quad Gigabit Ethernet card update 06/12/2020 Uploaded dwg and obj files Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill:…
This is a multiboard holder for the Dewalt DCS355 oscillating tool. This is a remix of the drill holder for multiboard by @andrepadua, which is a really nice sturdy drill holder I use for my Dewalt drill and impact driver. I wanted to…
This model is compatible with the lego system.
Stop by the tavern before your adventure and enjoy a drink from this 12 oz can cooler. This mug is designed to be efficient to print with multicolor. The bands are horizontal and work well with flushing to infill providing almost zero…
This tool is used to press the seal into the housing. The issue with the seal is that both the inner seal on the waterpump shaft and the outer seal, which seals against the housing, have to be pressed into the housing without stressing…
If your brake reservoirs crumple, you may be using an automotive brake fluid (dot 5.1) in your brakes. This will destroy them and many plastic things along the way. I learned the hard way. For these brakes, use mineral oil only. Hi, my…
This model is compatible with the lego system.
Thanks to svatoš who provided a parametric file for fusion360 in order to ease the process of remixing to various sizes of stands. Here, the stand suitable for a Dell Precision 3551 with an inner gap of 26,5 mm. Should fit “tight”. If too…
This is remixe of @addohm_141025 's Wall mounted build plate holder. I modified it for 355mm and 350mm build plates. There are two versions. V2 have more stability but needs some more filament. CAD at onshape…
This model is compatible with the lego system.
This model is compatible with the lego system.
There are companies out their ROBBING you of 20ml of beer. Bastards! Anyway, this little widget props up a 355ml can to fit properly in your Yeti Colster/stubby holder. It then cleverly flips over, and tucks up into the dome in the bottom…
Hello everyone! I am an enthusiastic individual with a deep fascination for this bracket design. However, I couldn't find any brackets in the market that fit my requirements of 310 and 355 dimensions. Therefore, I took matters into my own…
This model is compatible with the lego system.
I loved having can lid for my 250mL redbull cans, but I had a few 355's recently and needed a version for those aswell. I present... that version!!! This fits 355mL redbull cans, but might also fit monster or other branded drink cans -…
This microphone holder is intended to be mounted separately from a car cradle/radio mount. The holes in the backplate fit the original hex-head Motorola screws for car mounting. Print Settings: Preset “Strength” 0.2mm resolution 6 wall…
Main Sail for Playmobil Pirate Ship (Model 3550). Available as blank or with pirate logo (see pictures). Designed and sized (23x20cm) to be wrapped around the yard so must be printed with FLEXIBLE filament (tested with 95A TPU). I did not…
I remixed the stand feet for this otherwise awesome design, as the original feet were a little thin and flimsy - especially on the larger stands. I've also scalloped the bottom of the feet so there's less risk of the stand rocking on…
I used the following settings: printed on the side, to have forces pulling the layers apart 0.2mm layer 3 walls 30% cubic infill manual support for the mounting holes I added a simple drill template. Two screws per bracket is properly a…
I love my Philips Coffee machine but only the bean reservoir to small. Therefore i created a bigger one! This thing fits the Philips EP3550 Enjoy! Please donate and don't make money of this object!! (RESPECT THE LICENSE) Print…
This model is compatible with the lego system.
Can be printed from pretty much any material. I used PET-G, but it was not the best choice due to the stringing in the holes.
It holds 3 cans, and fits on the Prusa Mini. The overall usefulness for this is questionable, because you could just as easily put 3 cans on your desk without this device. Regardless, I still made it, because its more satisfying to hear…
In meinem Getränkehalter im Auto fallen die Dosen immer um. Dieser Halter verhindert das.
Printed in PDVF, 100% filled. Made to suit my ball design, file also here. Should work with OE parts only, but i am not able to test.
Toyota Gearbox Shifter Bush 33557-33010. It's described as a bush by Toyota, but really it's just a dust/dirt wiper designed to keep the sliding contacts a bit cleaner to help minimise wear. It's not an exact replica of the original part.…
Honda Side Cover Grommet - Gommino fissaggio carene Honda OEM 83551-300-000 Recommended Filament: TPU Suitable for: All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
I noticed that the armament kit for the Fab365 A-10 Thunderbolt-II did not have a targeting pod. So I made one, and here it is!
Ball - Ferrari Part Number 154745 - Sits at the pivot of the gearstick. Currently unavailable. Now updated to V3 - Adjusted some diameters after test fitting.
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
the part was broken so i designed a new one. Printable without supports.
This low voltage divider fits Carlon rectangular multi-gang boxes (like B355R and B468R) and allows for safe separation of line voltage from low voltage. Please ensure that the use of this divider is compliant with applicable laws and…
Migrating from thingiverse https://www.thingiverse.com/thing:3857300 My Daughter did not want a name tag attached to the handle..... sigh.... designed this to fit in the hinge of the Thermos FUNtainer 12oz 355ml bottle, Might also fit the…
Simple push in place cover as my car is missing the upper protective panel as many 355's. Flexi filament needed, i used Filaflex 40.
Wall Mount modeled for a Lenovo X3550 M5 1U Rack Server. You need two of them, just mirror it in the slicer. Go ahead and give it thick layers and many walls, I used 0.32mm layer height and 8 walls. It's surprisingly strong and the only…
Simple color ring for a MTP3000 Series radio (for example MTP3550 in the picture). The ring is exactly 0.8mm thick for a 0.4mm nozzle. It can be used single-color or multi-color based on your personal preference :) PLA works fine, but a…
This is a Replacement Ladder For Vintage Playmobil Swingset 3552. Category: Toy & Game Accessories
the tool is printed in 4 parts 1x plunghe router top, 1x plunghe router buttom, 2x buttom lock. The tool requires (dremel multipurpose Cutting kit 565) printed with: 15% adaptive cubic infil 0.15 layer height pla scarf seam on contours…
Please subscribe to my YouTube channel if you enjoyed this model! This model is a rough mockup of the Miyoo 355, based on the available renders. Check out the 355 thread in the Rumor Mill forum on the Retro handhelds Discord for more…
Eine Nachbildung des Schiebeschalters aus einer Oberfräse von HolzHer 2355/2356
Adapter for 473ml (US 16 oz / US Pint / tall can) Yeti Colster to enable it to hold a 355ml(US 12 oz / short) can. See here for a 500ml adapter, and here for a 473ml adapter if you want to leave the 500 adapter on. A reupload of this…
Print up with tree supports. that's what works for me.
Adapts a Delta BFB0512HA-CX3D fan to the heatsink on a Dell HBA355e SAS card. Will work with other BFB0512 variants, but the BFB0512HA-CX3D is the one you want if you care about PWM control. Requires two M3x10 hex socket flat head screws…
Removed horizontal piece, not required for strength. This allows you to arrange the caddies on the bed to print 3-4 at a time.
Replacement for part 39835508
Clips must be added with superglue :)
Simple model for a Can Holder, used as a prototype for sizing a model for work. Updated with a standard 330ml EU can version - I used the wrong model for Sizing
Dieser kompakte Tag dient zur schnellen und eindeutigen Kennzeichnung von Motorola MTP3550 Funkgeräten. Er wird einfach über die Antenne geschoben und am Clip-Halter fixiert. Ideal für Feuerwehren, Rettungsdienste und Hilfsorganisationen,…
I needed additional divider inserts for my Plano 3555 small parts storage boxes. Prints without supports on my MK4 w/PLA.
Original closing bracket broke. This is biased on original size, but I might add version with hook extended by 3-5mm later. PET-G might be better for this (temperature), but PLA worked well.
Bothers me that manufacturers cannot just put these clips on their vacuums to attach the nozzle. This is a real simple and not really refined (aesthetically), but totally working, clip to attach the nozzle to the Shark cordless vacuum…
Achtung Akkugröße!! nur für 1950mAh Akkus !!NICHT für 2200mAH Akkus!! Dieses Modell ermöglicht es, das Motorola MTP3550 (und baugleiche Modelle) sicher und griffbereit im Auto zu verstauen. Der Adapter nutzt den vorhandenen Getränkehalter…
I made an tablehook as a replacement part for the kettler folding table 2355, but it seems that it also fits other folding tables, so i provided a picture with critical dimensions, if they match up it should fit on your table. To get all…
Print both if your X axis extrusion (aluminium section) is 355mm long and only one if it is 350mm
Cap to prevent accidental pressing of the lock. Category: Household
This holds 10 collets for Deckel SO/Alexander 2CG D-Bit grinders and their related pantographs. I included the Fusion360 so you can enhance, modify etc. for more or fewer collets. Print Settings Printer Brand: Creality Printer: Ender 3…
I like the idea, but 2 important comments: The ground coffee filler opening is sealed by the lid, so if I want to drink
Replacement spool holder for the XR1355. Printed with PLA, 0.2mm layers, base plate supports, and brim. After printing, use a razor blade (or similar) to gently separate the supports from the spool holder (see pics). Reassemble with…
A spacer to make 355ml cans fit in coolers that are designed for a 375ml can (standard size). Designed for a Yeti cooler.
Originally published here: Samsung Galaxy Core 2 g355 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the…
Suporte para embutir a câmera CS-355A no teto. São necessários: 2x M3 insert para fixar a placa suporior ao suporte principal; 2X molas tipo as usadas no spots de embutir.
A boom arm for ESP32 cam pan tilt system. The arm is actuated by a MG3550 servo and the pan tilt system by SG90 servos.
You really only need 2 of these feet. You can scale them up to nearly any size you wish. I don't see a need to make this larger/wider than 20mm in all honesty. The base models are only 10mm tall when laid on their side, but you can scale…
Printable 3D model. Duskull Wine Stopper, Pokemon inspiration. STL file.
0.2mm layer height, concentric top/bottom surface patterns for best appearance. Make sure to orient the disc correctly, one side is flush, the other is recessed. STL should load correctly, but just be sure to check before printing a ball…
Needs to be printed with TPU or another flexible material.
This mounting bracket was designed to make using the projector easier in temporary setups. The ubiquity of ¼"-20 screw support solutions in the photo/video industry makes it simple to find a quick place to mount a projector. Gorilla pods,…
[FR] séparateur pour tiroirs 35/52 (casier à vis) [EN] divider for 35/52 drawers (screw locker)
John Deere Zero Turn Z355E Key Chain Category: Other
EN: To identify a coolant pump. DE: Zur Kennzeichnung einer Kühlmittelpumpe.
Panel for a Philips PM 3355 oscilloscope. Untested clips. hexagonal cavities are for M3 nuts, models for covers included. The bottom side needs clearance from the front end shielding clips. The display module aligns well with the window,…
Spare Feet for Evolution S355CPS Saw
Holder for the WA3551.1 battery made for the honeycomb storage wall. Press the button of the battery for put in and take out. Made in PETG. But you can use PLA. My print settings: 0.24 mm 4 walls 20% infill Support: On build plate
The storage tray fits FibroTech, shelf, 110x355 mm. The storage tray, dimensions are 100x350x60 mm. The design is prepared for splitting the parts into two parts, if needed. i have added two locking pins to make it easier to align the two…
Eases the identification of differently configured radios. Use color change to have multiple colors. I'd recommend to have the color change after the plane surface. Print in 0.15mm layer height because of the fillets Organic (tree)…
connector to electric switch Kenwood Chefette A355
I had a broken Pentair Champion 355319 pool pump handle, so decided to make a simple model to replace it. The broken handle was allowing the pump strainer basket to rise up and leaves to bypass the strainer getting lodged in the pump…
Special tool 83302355850 for unlocking the automatic transmission on G-series BMWs. To assemble it, I used a 4 mm bar, along with a wire rope and an aluminum crimp sleeve Additionally, you'll need an release hook. I might make one later…
