Reinforced Crochet Board Pin - Horizontal Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom pin designed to print horizontally for maximum strength. Thinner profile. Scale to fit your printer's tolerances.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 109
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a custom pin designed for the Crocheting Board with Grid Template.
The original vertical pins can sometimes snap along the layer lines when under tension. I redesigned this pin to be printed horizontally (lying flat). This orientation ensures the filament grain runs the length of the pin, making it significantly stronger and more flexible without breaking.
I also made the pin slightly thinner to ensure it fits comfortably into the grid holes without getting stuck.
Important: Tolerance & Scaling
⚠ Please Read Before Printing a Full Batch
Every 3D printer has slightly different dimensional tolerances (accuracy). Because this pin needs to fit snugly into the grid holes:
Print a single test pin first.
Test the fit in your board.
If it is too tight or too loose: Adjust the scale in your slicer.
Recommended Print Settings
Orientation: Print lying flat on the bed (Horizontal).
Strength: 3 or 4 perimeters for maximum stiffness.
Brim: Recommended if you have adhesion issues. Especially on the nib side
Filament: PETG works great for this model