Reinforced Crochet Board Pin - Horizontal Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom pin designed to print horizontally for maximum strength. Thinner profile. Scale to fit your printer's tolerances.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 1
- Views
- 109
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a custom pin designed for the Crocheting Board with Grid Template.
The original vertical pins can sometimes snap along the layer lines when under tension. I redesigned this pin to be printed horizontally (lying flat). This orientation ensures the filament grain runs the length of the pin, making it significantly stronger and more flexible without breaking.
I also made the pin slightly thinner to ensure it fits comfortably into the grid holes without getting stuck.
Important: Tolerance & Scaling
⚠ Please Read Before Printing a Full Batch
Every 3D printer has slightly different dimensional tolerances (accuracy). Because this pin needs to fit snugly into the grid holes:
Print a single test pin first.
Test the fit in your board.
If it is too tight or too loose: Adjust the scale in your slicer.
Recommended Print Settings
Orientation: Print lying flat on the bed (Horizontal).
Strength: 3 or 4 perimeters for maximum stiffness.
Brim: Recommended if you have adhesion issues. Especially on the nib side
Filament: PETG works great for this model
