Rugged 9 Volt Battery Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rugged waterproof 9v box
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 155
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
I created this Rugged Box for the 9 Volt batteries I use while Metal Detecting. They are standard with my equipment.
My initial tests show that it is waterproof with the included file for the TPU Gasket.
Items Needed:
PETG Filament - It's easy to print with and sturdy for outdoor use. I used it for the Bottom, Top and Clasp.
TPU 95a Filament - This is used for the gasket and helps create a nice seal.
3 - M3x30mm Hex socket head bolts Amazon link
3 - M3x.5 nylon insert lock nuts Amazon link
These are not affiliate accounts.
Some Assembly Required:
To complete the project after printing all the parts, you will need the screws and washers. The screws thread through the holes rather easily and hold securely.
The photos provided will show proper placement of the Clasp, screws and nuts.
Print Settings:
3 Walls
15% Gyroid Infill
No supports needed
Use the provided .3mf files if possible. Optimized for Prusament Orange PETG
I created the case with the help of an awesome generator over at MakerWorld, HERE is the link to Iceman's page.