Couple Interlocking Heart Desk Decor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist couple interlocking heart desk decoration with an optional press-fit base. The heart can stand alone, but t
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 118
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This is a clean, modern Couple Heart Desk Decoration designed in Fusion 360.
The design consists of two parts:
Couple Interlocking Heart – can stand on its own
Optional Display Base – press-fit (snug fit), no glue needed
The base is not mandatory, but it improves stability and gives a more finished, professional look on your desk, shelf, or bedside table.
The model is optimized for easy printing:
No supports required
No glue required
Beginner-friendly
Prints cleanly in PLA
Great as:
Valentine’s gift
Anniversary decor
Couple desk ornament
Minimal home decor piece
🖨 PRINT SETTINGS (Recommended)
Material: PLA (PLA+, Silk PLA, or Matte PLA works great)
Supports: ❌ Not needed
Assembly: ✅ Press-fit (no glue)
Skill Level: Beginner
Suggested slicer settings:
Layer height: 0.2 mm
Walls: 2–3
Infill: 10–15%
Brim: Optional (if bed adhesion is weak)
Fit note (optional):
If the base feels too tight, scale the heart to 99.8–99.9% or lightly sand the feet.
🧩 ASSEMBLY INSTRUCTIONS
Print both parts: Couple Heart + Base (optional)
Align the heart feet with the slots in the base
Press down gently until fully seated
Enjoy your display!
(You can also display the heart without the base.)