Stackable Shelf Adapater U Profile - Remix - Top offset
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've remixed the original design to allow it to be stackable on an Ivar which uses the top shelf
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design is a great way to extend the height of IVAR units, but I found that if you have a shelf installed at the very top of the lower unit, the vertical posts can sometimes interfere with the shelf or the mounting pins.
The Modification
I added a 5mm leveled platform (offset) to one side of the adapter. This small elevation provides just enough clearance so you can stack an additional IVAR side post even when the top-most shelf position is occupied.
Better Compatibility: No more choosing between a top shelf and a stacked extension.
Versatile: Can be used "platform-up" to raise the top post or "platform-down" depending on your specific clearance needs.
Credits
Huge thanks to @HotPotato_2132845 for the excellent original design. This remix maintains the same screw-hole alignment and structural integrity of the original while adding a bit more flexibility for standard IKEA configurations.